Mounts & Accessories - Super Savings! Save up to 34%


Super Savings! Up to 34% off on Mounts & Accessories at Donations Central. Top brands include STEPPERONLINE, DROK, Fityle, vanpower, uxcell, Ecoliteled, UCONTRO, Toogoo, Wal front, RATTM MOTOR, Makermotor, NW, Ametek Lamb, uniquegoods, Walfront, SPK603, & Mophorn. Hurry! Limited time offers. Offers valid only while supplies last.



Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill
By STEPPERONLINE
In Stock
$37.50
$26.00
You Save: 31%

mpn: 23HS22-2804S, ean: 7535001558364,

4.9 out of 5 stars with 54 reviews
This bipolar Nema 23 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2.8A, allowing for a holding torque of 1.26Nm(178.5oz.in). Electrical Specification: * Manufacturer Part Number: 23HS22-2804S * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 1.26Nm(178.5oz.in) * Rated Current/phase: 2.8A * Phase Resistance: 0.9ohms * Inductance: 2.5mH+/-20%(1KHz) Physical Specification: * Frame Size: 57 x 57mm * Body Length: 56mm * Shaft Diameter:


Motor Speed Control Board, DROK DC 10-50V 60A High Power Motor Speed Controller PWM HHO Driver Controller Module 12V 24V 48V 3000W Extension Cord with Switch
By DROK
In Stock
$19.98

mpn: 2001712013,

4.5 out of 5 stars with 67 reviews
10-50V DC Motor Speed Controller with Switch Extension Cable   Parameters: Working voltage: DC10V-50V Control power: 0.01-3000W Max. rated current: 60A Different working voltage corresponding to different control power: 12V: 12V*60A =720W 24V: 24V*60A =1440W 36V: 36V*60A =2160W 40 V: 40V*60A =2400W 50V: 50V*60A =3000W Quiescent current: 0.04A (When the working voltage is DC10V-50V, the quiescent current cannot exceed 40ma) PWM duty ratio: 5%-100% PWM frequency: 15 kHz Working


Fityle TMC2130-V1.1 Stepper Motor Driver Module &Heat Sink 3D Printer Controller Part
By Fityle
In Stock
$14.99

mpn: 360f51455bd97fac6e378e3a489c0def, ean: 0729104743483,

4.4 out of 5 stars with 69 reviews
Description: - Two-phase stepper motor single-phase current 1.2A (peak 2.5A) motor current can be adjusted - Only SPI support - Motor input voltage range: 4.75 ~ 46V - Logic interface input voltage: 3 ~ 5V - Broken down into 256 - Combines maximum efficiency and best motor torque for noiseless operation - High-precision sensorless motor load detection - Reduce energy consumption by 75% - High-load drive without out-of-stepPackage Includes:1x TMC2130 V1.1 stepper motor driver1x heat sink1x


vanpower CNC MACH3 Breakout Board 4 Axis Interface 100Khz Driver Motion Controller
By vanpower
In Stock
$24.39

mpn: 210658, ean: 0788410304610,

4.9 out of 5 stars with 96 reviews
CNC MACH3 Breakout Board 4 Axis USB Interface 100Khz Driver Motion Controller Card with USB CableFeature:1. Support for connecting electronic handwheel.2. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.3. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.4. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.5. 4 general-purpose


Uxcell Power Tool Replacement Carbon Motor Brushes, 1/2 x 3/10 x 15/64 inch
By uxcell
In Stock
$14.55

mpn: a12062600ux0869, ean: 0608641184228,

4.3 out of 5 stars with 39 reviews
Carbon motor brushes are one of the most commonly replaced power tool components. Carbon Brushes with wire leads and brush springs attached. Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor.Product Name : Carbon Brush;Carbon Brush Size : 13 x 7.5 x 6mm / 1/2'' x 3/10'' x 15/64'' (L W H). Total Length(Approx) : 3.5cm / 1.4''. Color : As Picture Show. Net Weight : 14g. Package Content : 4 x Motor Carbon Brush.


MILWAUKEE CARBON BRUSHES 2650-20 (B55B) 18 Volt 1/4" Hex Impact Driver MW1
By Ecoliteled
In Stock
$13.00
$10.50
You Save: 19%

mpn: 1, ean: 8800159282447,

4.6 out of 5 stars with 12 reviews
MILWAUKEE BRUSH CARD ASSEMBLY  22-22-1630This authentic OEM sourced replacement part is designed for use with Milwaukee power tools. This assembly holds carbon brushes around the armature to provide stable contact. This assembly consists of: plastic holder ring, four (4) metal brush holders with springs and four (4) carbon brushes with lead wires attached.To replace this assembly you would need a screwdriver.First remove screws holding the cover togetherCarefully separate housing to gain


Uxcell Electric Replacement Motor Carbon Brushes, 17.5mm x 11mm x 6.5mm
By uxcell
In Stock
$15.30
$12.80
You Save: 16%

mpn: a10090300ux0019, ean: 0609613977466,

4.8 out of 5 stars with 74 reviews
Carbon motor brushes are one of the most commonly replaced power tool components.Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor.New brushes can restore a motor's electric braking.Product Name : Carbon Brush;Fitness : Electric MotorEach. Carbon Brush Size : 17.5 x 11 x 6.5mm/11/16'' x 7/16'' x 1/4'' (L W H);Total Length(Approx) : 1 1/4''(When Spring Stretching). Material : Carbon,Copper. Net Weight : 34g. Package Content : 10 x Motor


UCONTRO 3 Axis CNC Controller 400KHz USB Stick G-code M-code Spindle Control MPG Tool Setting Support Servo & Stepper
By UCONTRO
In Stock
$219.90

mpn: 55H,

4.8 out of 5 stars with 38 reviews
1. Package included: 1 x CNC Controller 1 x USB Cable 1 x Manual (Please let me know your email, we will send it to you) 2. Product IntroductionTC55H is an upgrading version of TC55. It can control 4 feeding axis, 1 analog spindle. It is equipped with 16 input port and 8 output port, supporting importing G code files from USB stick. Support saving the current coordinates after power off. 3. Technical Specifications Minimum data unit 0.001 mm Maximum data size ± 99999.999mm Maximum


TOOGOO 100-240VAC / 140-340VDC High Power Motor Controller Wireless Remote Control F0D2
By Toogoo
In Stock
$34.97

mpn: ESBS-B192701798642S-S149268B-TOG, ean: 0192701798642,

4.6 out of 5 stars with 73 reviews
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) 100-240VAC / 140-340VDC High Power Motor Controller Wireless Remote Control F0D2Items DescriptionSpecifications: Color: white+Transparent colorMaterial: metalRelay Current: 30A Control Power: Max. 2000W Trigger Voltage: 12-48V Frequency: 315MB Control Modes: Self Locking, Inching Application: Water Pump, Fans,


AC 220V 6000W Adjustable SCR Digital Voltage Regulator Electric Motor Speed Control Dimming Dimmer Thermostat Module
By Wal front
In Stock
$18.49

mpn: Wal fronttao4pn0g6h, ean: 0798382839386,

4.4 out of 5 stars with 24 reviews
It can be used as power supply for large electrical devices, enough for household appliances or for small factory. Could be widely used as heat controller on electric stoves, water heaters, light dimmer on lamps, speed controller on small motors, or temperature controller on electric soldering iron, etc. Specification: Voltage: AC 220V Max Power: 6000W(instantaneous limit power for impedance load; for long time use, 3000w or lower is recommended) Voltage Adjustment: 0-100% (nonlinear)


RATTM MOTOR 4 Axis MPG Pendant Handwheel with Emergency Stop for Siemens/MITSUBISHI/CNC Router Engraving Milling Lathe Machine
By RATTM MOTOR
In Stock
$70.00

mpn: PLCHANDWHEEL, ean: 0681385630909,

4.4 out of 5 stars with 131 reviews
Package include: 1 x Pendant Handwheel with Emergency Stop Handwheel Specification: 1) CNC system and position control of various mechanical devices 2) Metal code disc, high precision, good texture 3) Easy installation Resolution:100PPR Supply Voltage:DC5V +/-5% Supply Current:≤80mA Output Voltage:≥2.5V and ≤0.4V Output Current:Name:4 Axis Pendant Handwheel with Emergency Stop. The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100 selectable. You are bidding one


2 Pcs Washing Machine 28mm x 10mm x 6mm Angle Grinder Carbon Brush
By uxcell
In Stock
$10.19

mpn: a14031400ux0108, ean: 0700724930699,

4.7 out of 5 stars with 92 reviews
Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc.Worn brushes are often the cause of a poorly running motor.Replacing brushes can fix an intermittent motor.New brushes can restore a motor's electric braking.Product Name : Carbon Brush;Carbon Brush Size (Approx) : 28 x 10 x 6mm/ 1 1/8'' x 2/5'' x 3/13''(L*W*H). Total Length(flat) : 60mm/ 2.4''. Material : Carbon, Metal. Weight : 8g. Package Content : 2 x Carbon


Makermotor 10mm 2-flat Shaft 12V DC Reversible Electric Gear Motor 50 RPM
By Makermotor
In Stock
$69.00
$64.00
You Save: 7%

mpn: FBA_PN01007, ean: 7535001786552,

4.3 out of 5 stars with 111 reviews
This is a brand new electric gear motor that has extremely high torque to handle many heavy-load applications. The specifications are listed below: Rated Voltage: 13.5 VDC Rated Speed: 50 RPM Rated Load: 60 Watts Rated Torque: 6 N-m (4.4 ft-lb) Mounting: M6 screw holes Shaft: 10mm shaft with 2 flats where flat to flat is 6.6mm and threaded end to fit a M6 tightening nut12V PMDC. Right Angle Worm Gear. 50 RPM Low Speed. Simple 2 Wire Leads. Reversible.


NW 80W Strong Magnetic Double Ball Bearing 555 Motor High Torque 12V-24V 6250-12600RPM
By NW
In Stock
$10.99

mpn: 9375, ean: 0606829254695,

4.9 out of 5 stars with 80 reviews
Motor diameter: 35.9 MM (plus support magnetosphere is 37.8MM) Motor length: 57 MM Output shaft: 3.15 MM (there are 4 non slip embossed) Output length: 28.5 MM. Screw hole: M 3 Screw hole distance: 24.5 MM Weight: 233 G Voltage: 12 V Current: 0.19 A (blocking up to 3 A) Speed: 6250 RPM Voltage: 18 V Current: 0.2 A (blocking up to 3 A) Speed: 9450 RPM Voltage: 24 V Current: 0.22 A (blocking 4.5A) Speed: 12600 RPMMotor diameter: 35.9 MM (plus support magnetosphere is 37.8MM). Motor length: 57 MM.


Replacement Motor Brush Set, 120 VAC, PK2
By Ametek Lamb
In Stock
$14.47
$9.58
You Save: 34%

mpn: 833490-52, ean: 0094706244035,

4.9 out of 5 stars with 47 reviews
'Replacement Motor Brush Set, Carbon, 120 VAC, Length 2.8 In, Width 0.4 In, Height 0.5 In, For Use with G0836236 Vacuum Motor, Includes 2 Brushes, 2 Holders and 2 Springs, Package Quantity 2'Price For: Each Item: Replacement Motor Brush Set Type: Carbon Includes: 2 Brushes, 2 Holders and 2 Springs Country of Origin (subject to change): Mexico.


uniquegoods 6V 12V 24V Digital Display LED DC Motor Speed Controller PWM Stepless Speed Control Switch HHO Driver - Black CCM5D
By uniquegoods
In Stock
$12.23
$10.99
You Save: 10%

mpn: CCM5D, ean: 0605145000665,

4.7 out of 5 stars with 30 reviews
Features: CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions. The display range of 3-digit LED display is ''000''-''100''. (For example, displayed ''066'' as the picture 1, it means that the PWM output duty cycle is 66%.) Adjustable speed range is 0%-100%. Suitable for the DC motor (or DC load) within 5A, Peak current 8A. Incorporate a push key.


DC Motor Speed Controller, 10V-50V 40A PWM Motor Speed Controller High Power Motor Speed Governor with Reversing Direction Switch 12V 24V 36V
By Walfront
In Stock
$16.99
$16.82
You Save: 1%

mpn: Walfrontr7beu5zqs1, ean: 0792172724555,

4.8 out of 5 stars with 139 reviews
This pwm motor speed controller can set direction of rotation so that the motor's direction can be reversed. The input voltage can be DC 10V to 50V. Motor speed controller is made with high quality circuit board which ensures a longer service life.  If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply Specifications: Input Voltage: DC10V to 50V Output Voltage: Linear with load Max Current: 60A Continuous Current: 40A Speed Range: 0%


UCONTRO Single/2/3/4 Axis CNC Controller 400KHz USB Stick G code Spindle Control MPG Tool Setting Support Servo & Stepper (4 Axis)
By UCONTRO
In Stock
$229.90

mpn: 55H,

4.9 out of 5 stars with 43 reviews
1. Package included: 1 x CNC Controller 1 x USB Cable 1 x Manual (Please let me know your email, we will send it to you) 2. Product IntroductionTC55H is an upgrading version of TC55. It can control 4 feeding axis, 1 analog spindle. It is equipped with 16 input port and 8 output port, supporting importing G code files from USB stick. Support saving the current coordinates after power off. 3. Technical Specifications Minimum data unit 0.001 mm Maximum data size ± 99999.999mm Maximum


12V 24V 20A Max PWM DC Motor Stepless Adjustable Speed Controller 25kHz
By SPK603
In Stock
$28.21

mpn: DEUNJED-CHUEINOI-GSQ180, ean: 0785045046793,

4.8 out of 5 stars with 65 reviews
Description : 12V 24V 20A Max PWM DC Motor Stepless Adjustable Speed Controller 25kHz Features : Suitable for the DC motor (or DC load) within 20A. It with metal shell and connective label, very easy to install and use. Potentiometer with adjust speed swtich function, and button swtich function. Specification : Input supply voltage: DC 9V to 60V Max current: 20A Sustained current: 18A PWM frequency: 25KHz Adjustable speed range: 0%-100% Speed adjustment way: Potentiometer Output voltage: Linear


Mophorn 1800W Electric Brushless DC Motor Kit 48V High Speed Brushless Motor with 32A Speed Controller and Throttle Grip Kit for Go Karts E-bike Electric Throttle Motorcycle Scooter and More (1800W)
By Mophorn
In Stock
$139.99

mpn: Mophorn Spindle Motor Kit, ean: 0719034878638,

4.2 out of 5 stars with 102 reviews
1800W Brushless DC Motor Kit 48V High Speed Brushless Motor with 32A Speed Controller and Throttle Grip Kit for Go Karts E-bike Electric Throttle Motorcycle Scooter and More The Brushless DC Motor Kit is powerfrugal and stable for low noise, long lifespan. It suits for electric throttle, motorcycle, scooter, go karts, e-bike, atv, mini bikes, pocket bikes and electric dirt bikes. You will receive a gearing silver Brushless motor of which length is 134mm with speed: 4500rpm - 5200rpm, A



Viewing Page 1 of 5

View more products in Electric Motors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - donationscentral.org. All Rights Reserved.